Corsair LL120 RGB 120mm Dual Light Loop PWM RGB Fans - Triple Fan Kit with Lighting Node PRO - White

Product Information

Once you’ve done that, take the lighting connector that’s attached to the fan and plug it into any of the ports labeled one to six on the lighting control hub. Take note of the label here as it’ll be vital to the light control. We recommend that you do it in a sequence to make it easy for you to remember. The fans themselves feature two cables with one connecting to the motherboard or fan control unit and the other connecting to the RGB control unit. – Performance However, the ML120 looks different with elevated fins that provide targeted and generally better airflow than the LL120s. This feature makes them the ideal fans for both cases and radiators. The CORSAIR LL120 RGB LED PWM fan boasts 16 independent RGB LEDs across two separate light loops to create vibrant lighting and visual effects. TWO RGB LIGHT LOOPS The other side of the lighting node pro has the USB connector, which connects to your motherboard via the USB cable that comes with the kit. One end of this USB cable is mini-USB while the other end features a nine-pin USB header. Also, there’s a SATA power connector that powers the lighting node pro. – Setting Up the Fan and Connectors

Created for Quiet:>/b> 120mm Fan blade engineered for low-noise operation without sacrificing performanceThe setup of the ML120s requires the same process as the LL120s. All you have to do is plug the fans into the RGB lighting control hub, the control hub to the lighting node pro, and connect all power connectors to their motherboard and PSU headers as we’ve explained above. Conclusion

Dual RGB Lighting Loop: 16 Independent RGB LEDs in every fan, split between two separate light loops, allow for nearly endless customization Please enter your motherboard BIOS and set the correspondent fan header at PWM mode. (Update your motherboard BIOS if necessary) These fans run at low noise even at high loads; however, the ML series are louder than the LL120s. The ML 120s can go up to 30 decibels while the LL120s max out at 24.8 decibels. Yes, the ML120s are louder but that’s because they spin faster at higher loads and can reach up to 2000RPM compared to the max 1500 RPM of the LL120s. – Setting Up Since there’s no one way to install a fan as each system has its own unique airflow setup, we’ll be giving you an overview that’ll help you understand how the setup should be while explaining the accessories attached to the fans. – Fan Connectors

Now plug the SATA power connectors into your PSU and turn on your system. Your fans should start working and the RGB should light up immediately. – Setting Up the Software

You can set them up so they don’t spin until they’re needed, which allows you to enjoy an extremely quiet setup if your case isn’t too hot. This zero RPM ability makes them a good choice as cooling fans for AIOs. In terms of airflow, the LL120s do a good job as they’re able to attain 1.61mm static pressure and a fan airflow of 43.25 CFM. What Is Corsair ML120 Best For? Rule 1// The tubes of the radiator must avoid the tenon of the UNI FAN and be at the safe area, which is in grey in the image.This product is intended as an expansion of the LL120 RGB LED 3 fan kit with Lighting Node PRO. The RGB functionality of this product requires an RGB Lighting hub and Lighting Node PRO. COMPLETE PWM CONTROL