Once injection is completed it is essential to re-plaster ONLY with the correct DRY WALL RENOVATING PLASTER. We had then got no hydro DPC cream installed above the the tanking slurry to prevent water rising past the tanking.

It is advisable to leave walls injected with DampSolve to dry for as long as possible, and for at least 14 days, before removing excess salts and commencing replastering. Internal plaster affected by hydroscopic salts is removed from the area to be treated to a height of 300mm above the maximum level of the Rising Damp. With Rentokil Property Care, you can trust our many years of experience and team of qualified professionals to put your rising damp problem right with our damp proof injection service. No Hydro Damp Proof Cream is an easy-to-use, high-strength damp proofing cream, designed to provide an effective barrier against rising damp.Once rising damp has been professionally diagnosed, you simply need to inject a new damp proof course (DPC) into the mortar joint. Although a chemical injection is not suitable for all properties it is the most cost-effective and reliable method of rising damp treatment when it can be applied.

The WTA test method is particularly tough on DPC products because the test walls are subjected to continual damp with no "dwell period" to assist the curing of the cream.Replastering with an appropriate, salt-resistant product, such as Renovation Plaster or Renderproof, is essential to prevent further damage to the plaster finish. However, the drying processes depend on conditions, ventilation and the type of masonry, so drying may take considerably longer.

It provides a new chemical damp proof course - a permanent horizontal water repellent barrier against rising damp. No Hydro Damp Proofing Cream has been formulated to form an effective rising damp treatment in walls of all types, this is critical because no two walls affected by rising damp are alike. Once injected, the cream diffuses along the mortar course before curing to form a breathable water-repellent resin – preventing dampness from rising up the wall. Kiesol C is a next generation Damp Proofing Cream, providing permanent protection against rising damp. The injection cream has a special consistency that allows the active ingredients to optimally penetrate the wall.Our team have chosen Drywall plus because it uses the highest concentration of silane available in DPC injection cream on the market. When replastering you can use No Hydro Salt Inhibitor, our salt inhibitor is a high-specification plaster additive for use in sand-cement renders after the installation of a remedial damp proof course. DampSolve DPC Injection Cream is easy to use and can be installed in compliance with the British Standard 'Code of Practice for Installation of Chemical Damp Proof Courses' BS6576:2005.